PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-211 N304-75
2-211 N304-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN, center_hole_diameter: 0.813 INCHES NOMINAL IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-559-6182, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-211 N304-75
NSN: 5331-00-559-6182
FSC: 5331 — O-RING
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
center_hole_diameter0.813 INCHES NOMINAL IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.135 INCHES NOMINAL IN
cross-sectional_shape_styleO-RING
cross_section_outside_diameter0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
material_document_and_classificationMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5331-00-559-6182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-211 N304-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.786 INCHES MINIMUM AND 0.806 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.786 INCHES MINIMUM AND 0.806 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.056 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
131416Interchangeable
interchangeable cross-reference
interchangeable
91304726Interchangeable
interchangeable cross-reference
interchangeable
113-116Interchangeable
interchangeable cross-reference
interchangeable
7260009-2Interchangeable
interchangeable cross-reference
interchangeable
21845-1Interchangeable
interchangeable cross-reference
interchangeable
20-40201Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-211 N304-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-211 N304-75?
2-211 N304-75 is a O-RING.
What parts can replace 2-211 N304-75?
There are 25 known substitutes for 2-211 N304-75: 131416, 91304726, 113-116 and 22 more. Substitute compatibility should be verified for your specific system.
Is 2-211 N304-75 still available?
2-211 N304-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-211 N304-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026