PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330009359225
5330009359225 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE CASE, housing_bore_diameter: 2.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-935-9225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330009359225
NSN: 5330-00-935-9225
FSC: 5330
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE CASE
housing_bore_diameter2.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.500 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE CASE
NSN5330-00-935-9225
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330009359225 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE CASE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 2.250 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE CASE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HOUSING BORE DIAMETER2.250 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE CASE
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
AA52524/13-27-3Interchangeable
interchangeable cross-reference
interchangeable
A-A-52524/13Interchangeable
interchangeable cross-reference
interchangeable
MS51001-27-3Interchangeable
interchangeable cross-reference
interchangeable
AA52524/13-1-3Interchangeable
interchangeable cross-reference
interchangeable
AA52524-13-1-3Interchangeable
interchangeable cross-reference
interchangeable
MS51001-11-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330009359225?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330009359225?
5330009359225 is a SEAL,PLAIN ENCASED.
What parts can replace 5330009359225?
There are 24 known substitutes for 5330009359225: AA52524/13-27-3, A-A-52524/13, MS51001-27-3 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330009359225?
5330009359225 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-935-9225. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330009359225

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026