PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AA52524/13-27-3
AA52524/13-27-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The AA52524/13-27-3 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-020-0205, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AA52524/13-27-3
NSN: 5330-00-020-0205
FSC: 5330
CAGE: 58536 — FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
Part NumberAA52524/13-27-3
NSN5330-00-020-0205
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AA52524/13-27-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
TEMP RATING: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
•
CASE STYLE: RECESSED
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE CASE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
TEMP RATING-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
CASE STYLERECESSED
MATERIALSTEEL CASE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1740 FEET PER MINUTE FT
SURFACE TREATMENTZINC AND CHROMATE CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
AA52524/13-1-3Interchangeable
interchangeable cross-reference
interchangeable
A-A-52524/13Interchangeable
interchangeable cross-reference
interchangeable
AA52524-13-1-3Interchangeable
interchangeable cross-reference
interchangeable
MS51001-11-2Interchangeable
interchangeable cross-reference
interchangeable
AA52524/13-11-2Interchangeable
interchangeable cross-reference
interchangeable
MS 51001-12-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AA52524/13-27-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AA52524/13-27-3?
AA52524/13-27-3 is a AA52524/13-27-3.
What parts can replace AA52524/13-27-3?
There are 23 known substitutes for AA52524/13-27-3: AA52524/13-1-3, A-A-52524/13, AA52524-13-1-3 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AA52524/13-27-3?
AA52524/13-27-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-020-0205. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AA52524/13-27-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026