PartsTable
Technical Data Sheet
5330005858200 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BACK-UP RING,PREFORMED PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE, special_features: JOINT TYPE: SCARF-PERIPHERAL RETAINER, peripheral_diameter: 1.841 INCHES NOMINAL IN, center_hole_diameter: 1.503 INCHES NOMINAL IN, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN, material_document_and_classification: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-585-8200, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330005858200
NSN: 5330-00-585-8200
FSC: 5330
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE
special_featuresJOINT TYPE: SCARF-PERIPHERAL RETAINER
peripheral_diameter1.841 INCHES NOMINAL IN
center_hole_diameter1.503 INCHES NOMINAL IN
cross-sectional_height0.069 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE
NSN5330-00-585-8200
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330005858200 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 1.503 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE
PERIPHERAL DIAMETER: 1.841 INCHES NOMINAL IN
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
SPECIAL FEATURESJOINT TYPE: SCARF-PERIPHERAL RETAINER
CENTER HOLE DIAMETER1.503 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE
PERIPHERAL DIAMETER1.841 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
350WS300PT19Interchangeable
interchangeable cross-reference
interchangeable
709020Interchangeable
interchangeable cross-reference
interchangeable
MS9058-10Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS9058Interchangeable
interchangeable cross-reference
interchangeable
MS9058-32Interchangeable
interchangeable cross-reference
interchangeable
868879-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330005858200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330005858200?
5330005858200 is a BACK-UP RING,PREFORMED PACKING.
What parts can replace 5330005858200?
There are 23 known substitutes for 5330005858200: 350WS300PT19, 709020, MS9058-10 and 20 more. Substitute compatibility should be verified for your specific system.
Is 5330005858200 still available?
5330005858200 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330005858200