PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 868879-2
868879-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BACK-UP RING,PREFORMED PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC, special_features: JOINT TYPE: SCARF-PERIPHERAL RETAINER, peripheral_diameter: 0.657 INCHES NOMINAL IN, center_hole_diameter: 0.423 INCHES NOMINAL IN, cross-sectional_height: 0.061 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-515-3432, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
868879-2
NSN: 5330-00-515-3432
FSC: 5330
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialPLASTIC
special_featuresJOINT TYPE: SCARF-PERIPHERAL RETAINER
peripheral_diameter0.657 INCHES NOMINAL IN
center_hole_diameter0.423 INCHES NOMINAL IN
cross-sectional_height0.061 INCHES NOMINAL IN
NSN5330-00-515-3432
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 868879-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC
•
PERIPHERAL DIAMETER: 0.657 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.423 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC
PERIPHERAL DIAMETER0.657 INCHES NOMINAL IN
SPECIAL FEATURESJOINT TYPE: SCARF-PERIPHERAL RETAINER
CROSS-SECTIONAL HEIGHT0.061 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.423 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
MS9058-10Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS9058Interchangeable
interchangeable cross-reference
interchangeable
MS9058-32Interchangeable
interchangeable cross-reference
interchangeable
1005-501-3583Interchangeable
interchangeable cross-reference
interchangeable
307689Interchangeable
interchangeable cross-reference
interchangeable
5365005013583Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 868879-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 868879-2?
868879-2 is a BACK-UP RING,PREFORMED PACKING.
What parts can replace 868879-2?
There are 24 known substitutes for 868879-2: MS9058-10, SAE-AS9058, MS9058-32 and 21 more. Substitute compatibility should be verified for your specific system.
Is 868879-2 still available?
868879-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 868879-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026