The Packing,preformed, cataloged under National Stock Number 5330-01-506-9666, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Garlock Inc Compression Packing Facility Div of Coltec Industries Inc. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-506-9666 |
| Primary Part Number | 44121-7173 STYLE 5022AFP |
| Item Name | Packing,preformed |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Garlock Inc Compression Packing Facility Div of Coltec Industries Inc |
| Status | ACTIVE |
| Lubrication Material | OIL OVERALL |
| Temp Rating | 450.0 FAHRENHEIT DEGF |
| Cross-Sectional Height | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN |
| Lubrication Method | IMPREGNATED |
| Joint Quantity | 1 |
| Supplementary Features | INTENDED FOR DYNAMIC SERVICE AND SHIPBOARD FLUIDS EXCEPT SUPERHEATED STEAM OR OTHER SERVICE RESULTING IN PACKING TEMPERATURES OF OVER 450 DEGREES FAHRENHEIT OXYGEN, MOLTEN ALKALINE METALS, OR FLUOROCHEMICALS; PRESSURES SHOULD NOT EXCEED 150 POUNDS PER SQUARE INCH AT THE PACKING, AND ROD OR SHAFT SPEED SHOULD NOT EXCEED 1,5000 FEET PER MINUTE LBS |
| Cross-Sectional Shape Style | ANGLE |
| Cut Type | DIAGONAL OVERALL |
| Hazardous Substances | OIL AND PLASTIC |
| Specification/standard Data | 81349-MIL-P-24396 GOVERNMENT SPECIFICATION |
| Peripheral Diameter | 0.910 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | A TYPE |
| Center Hole Diameter | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-P-24396 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | PLASTIC POLYURETHANE OVERALL |
| Joint Type | SCARF-PERIPHERAL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 44121-7173 STYLE 5022AFP PRIMARY | Garlock Inc Compression Packing Facility Div of Coltec Industries Inc (USA) |
| Reference | Meaning |
|---|---|
| T793-0062-012-7500 | 5/9 Secondary reference U.S. Government activity |
| 93016H4101 | 7/2 Vendor item drawing reference Marine Corps Systems Command Div Marine Corps Systems Command Technical Data Repository Customer Service |
NSN 5330-01-506-9666 is a Packing,preformed, manufactured by Garlock Inc Compression Packing Facility Div of Coltec Industries Inc, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-506-9666 has 1 manufacturer part number on file: 44121-7173 STYLE 5022AFP (Garlock Inc Compression Packing Facility Div of Coltec Industries Inc).
Key specifications for 44121-7173 STYLE 5022AFP: Lubrication Material: OIL OVERALL; Temp Rating: 450.0 FAHRENHEIT DEGF; Cross-Sectional Height: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN; Lubrication Method: IMPREGNATED. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.