The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC POLYURETHANE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, temp_rating: 450.0 FAHRENHEIT DEGF, lubrication_method: IMPREGNATED, peripheral_diameter: 0.910 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5330-01-506-9666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
44121-7173 STYLE 5022AFP
NSN:5330-01-506-9666 FSC:5330 — Packing and Gasket Materials CAGE:3N611 — GARLOCK INC COMPRESSION PACKING FACILITY DIV OF COLTEC INDUSTRIES INC (USA)
SPECIFICATIONS
cut_type
DIAGONAL OVERALL
material
PLASTIC POLYURETHANE OVERALL
joint_type
SCARF-PERIPHERAL OVERALL
temp_rating
450.0 FAHRENHEIT DEGF
joint_quantity
1
lubrication_method
IMPREGNATED
peripheral_diameter
0.910 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
center_hole_diameter
0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
hazardous_substances
OIL AND PLASTIC
lubrication_material
OIL OVERALL
cross-sectional_height
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
end_item_identification
USED ON 93016H4100; END ITEM IS FUEL PUMP, 600 GPM (FU604G) 4930-01-392-7579
NSN
5330-01-506-9666
COMPONENT DIAGRAM
KEY FEATURES
•
LUBRICATION MATERIAL: OIL OVERALL
•
TEMP RATING: 450.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
LUBRICATION METHOD: IMPREGNATED
•
JOINT QUANTITY: 1
•
SUPPLEMENTARY FEATURES: INTENDED FOR DYNAMIC SERVICE AND SHIPBOARD FLUIDS EXCEPT SUPERHEATED STEAM OR OTHER SERVICE RESULTING IN PACKING TEMPERATURES OF OVER 450 DEGREES FAHRENHEIT OXYGEN, MOLTEN ALKALINE METALS, OR FLUOROCHEMICALS; PRESSURES SHOULD NOT EXCEED 150 POUNDS PER SQUARE INCH AT THE PACKING, AND ROD OR SHAFT SPEED SHOULD NOT EXCEED 1,5000 FEET PER MINUTE LBS
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
CUT TYPE: DIAGONAL OVERALL
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIAL
OIL OVERALL
TEMP RATING
450.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
LUBRICATION METHOD
IMPREGNATED
JOINT QUANTITY
1
SUPPLEMENTARY FEATURES
INTENDED FOR DYNAMIC SERVICE AND SHIPBOARD FLUIDS EXCEPT SUPERHEATED STEAM OR OTHER SERVICE RESULTING IN PACKING TEMPERATURES OF OVER 450 DEGREES FAHRENHEIT OXYGEN, MOLTEN ALKALINE METALS, OR FLUOROCHEMICALS; PRESSURES SHOULD NOT EXCEED 150 POUNDS PER SQUARE INCH AT THE PACKING, AND ROD OR SHAFT SPEED SHOULD NOT EXCEED 1,5000 FEET PER MINUTE LBS
CROSS-SECTIONAL SHAPE STYLE
ANGLE
CUT TYPE
DIAGONAL OVERALL
HAZARDOUS SUBSTANCES
OIL AND PLASTIC
SPECIFICATION/STANDARD DATA
81349-MIL-P-24396 GOVERNMENT SPECIFICATION
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44121-7173 STYLE 5022AFP?
44121-7173 STYLE 5022AFP is a PACKING,PREFORMED.
What parts can replace 44121-7173 STYLE 5022AFP?
There are 2 known substitutes for 44121-7173 STYLE 5022AFP: T793-0062-012-7500, 93016H4101. Substitute compatibility should be verified for your specific system.
What is the NSN for 44121-7173 STYLE 5022AFP?
44121-7173 STYLE 5022AFP is cataloged in the U.S. Government catalog under NSN 5330-01-506-9666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.