The Gasket, cataloged under National Stock Number 5330-01-443-8762, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-443-8762 |
| Primary Part Number | 32-1967 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.032 INCHES NOMINAL IN |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Outside Edge to Inside Edge Smallest Distance Along Width | 0.620 INCHES NOMINAL IN |
| Hardness Rating | 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL |
| Style Designator | NON-CIRCULAR |
| Material Document and Classification | ASTM D2000 TY FC GE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | SOLID SINGLE OR COMPOSITION |
| Aperture Width | 2.210 INCHES MINIMUM AND 2.290 INCHES MAXIMUM IN |
| Aperture Length | 5.000 INCHES MINIMUM AND 5.030 INCHES MAXIMUM IN |
| Bolt Hole Quantity | 14 |
| Outside Edge to Inside Edge Smallest Distance Along Length | 0.580 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN |
| Center to Center Distance Between Bolt Holes Along Length | 1.125 INCHES NOMINAL FIFTEENTH HOLE IN |
| Center to Center Distance Between Bolt Holes Along Width | 1.438 INCHES NOMINAL FIFTEENTH HOLE IN |
| Outside Edge to Bolt Hole Center Distance Along Length | 0.312 INCHES NOMINAL IN |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | RUBBER SILICONE CLASS Q OVERALL |
| Hole Diameter | 0.247 INCHES MINIMUM AND 0.256 INCHES MAXIMUM FIFTEENTH HOLE IN |
| Outside Edge to Bolt Hole Center Distance Along Width | 0.312 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 32-1967 PRIMARY | Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc (USA) |
| Reference | Meaning |
|---|---|
| LO-014438762 | 5/9 Secondary reference Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| PO0165NRP | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| LL-HX0-4767 | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
NSN 5330-01-443-8762 is a Gasket, manufactured by Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-443-8762 has 1 manufacturer part number on file: 32-1967 (Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc).
Key specifications for 32-1967: Cross-Sectional Thickness: 0.032 INCHES NOMINAL IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Outside Edge to Inside Edge Smallest Distance Along Width: 0.620 INCHES NOMINAL IN; Hardness Rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL. 18 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.