The Seal,nonmetallic Special Shaped, cataloged under National Stock Number 5330-01-356-2545, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-356-2545 |
| Primary Part Number | A34U11295-1 |
| Item Name | Seal,nonmetallic Special Shaped |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| End Cut Length | 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN |
| Cross-Sectional Thickness | 0.080 INCHES NOMINAL0.080 INCHES NOMINAL IN |
| Cross-Sectional Height | 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN |
| Cross-Sectional Width | 1.600 INCHES NOMINAL1.600 INCHES NOMINAL IN |
| Style Designator | STRIP |
| Material Document and Classification | GS179B4,CAGE 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | HOLLOW BULBHOLLOW BULB |
| Cross Section Inside Diameter | 0.590 INCHES NOMINAL0.590 INCHES NOMINAL IN |
| End Cut Angle | 45.0 DEGREES45.0 DEGREES |
| Material | RUBBER OVERALL |
| Construction | ONE-PIECEONE-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| A34U11295-1 PRIMARY | Northrop Grumman Systems Corporation (USA) |
NSN 5330-01-356-2545 is a Seal,nonmetallic Special Shaped, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-356-2545 has 1 manufacturer part number on file: A34U11295-1 (Northrop Grumman Systems Corporation).
Key specifications for A34U11295-1: End Cut Length: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN; Cross-Sectional Thickness: 0.080 INCHES NOMINAL0.080 INCHES NOMINAL IN; Cross-Sectional Height: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN; Cross-Sectional Width: 1.600 INCHES NOMINAL1.600 INCHES NOMINAL IN. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.