PartsTable
Technical Data Sheet
Download PDF

A34U11295-1 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A34U11295-1: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER OVERALL, construction: ONE-PIECEONE-PIECE, end_cut_angle: 45.0 DEGREES45.0 DEGREES, end_cut_length: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN, overall_length: 7.500 INCHES NOMINAL7.500 INCHES NOMINAL IN, style_designator: STRIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-356-2545, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A34U11295-1
NSN: 5330-01-356-2545
FSC: 5330 — Packing and Gasket Materials
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialRUBBER OVERALL
constructionONE-PIECEONE-PIECE
end_cut_angle45.0 DEGREES45.0 DEGREES
end_cut_length0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
overall_length7.500 INCHES NOMINAL7.500 INCHES NOMINAL IN
style_designatorSTRIP
cross-sectional_width1.600 INCHES NOMINAL1.600 INCHES NOMINAL IN
cross-sectional_height0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
cross-sectional_thickness0.080 INCHES NOMINAL0.080 INCHES NOMINAL IN
cross-sectional_shape_styleHOLLOW BULBHOLLOW BULB
cross_section_inside_diameter0.590 INCHES NOMINAL0.590 INCHES NOMINAL IN
material_document_and_classificationGS179B4,CAGE 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-356-2545
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A34U11295-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END CUT LENGTH: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.080 INCHES NOMINAL0.080 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 1.600 INCHES NOMINAL1.600 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: GS179B4,CAGE 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW BULBHOLLOW BULB
TECHNICAL CHARACTERISTICS
END CUT LENGTH0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.080 INCHES NOMINAL0.080 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH1.600 INCHES NOMINAL1.600 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONGS179B4,CAGE 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH7.500 INCHES NOMINAL7.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEHOLLOW BULBHOLLOW BULB
CROSS SECTION INSIDE DIAMETER0.590 INCHES NOMINAL0.590 INCHES NOMINAL IN
END CUT ANGLE45.0 DEGREES45.0 DEGREES
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A34U11295-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A34U11295-1?
A34U11295-1 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What is the NSN for A34U11295-1?
A34U11295-1 is cataloged in the U.S. Government catalog under NSN 5330-01-356-2545. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A34U11295-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.