The Gasket, cataloged under National Stock Number 5330-01-209-1073, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Raytheon Co ESD Long Island Div. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-209-1073 |
| Primary Part Number | 0374096-1 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Raytheon Co ESD Long Island Div |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| Inside Corner Radius | 0.030 INCHES NOMINAL IN |
| Hardness Rating | 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL |
| Style Designator | NON-CIRCULAR |
| Material Document and Classification | MIL-R-25988 TY 2 GR 70 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Aperture Width | 0.631 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN |
| Elongation Percentage | 125 MAXIMUM |
| Aperture Length | 1.215 INCHES MINIMUM AND 1.223 INCHES MAXIMUM IN |
| Outside Corner Radius | 0.047 INCHES NOMINAL IN |
| Material | RUBBER FLUOROSILICONE CLASS FQ OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 0374096-1 PRIMARY | Raytheon Co ESD Long Island Div (USA) |
NSN 5330-01-209-1073 is a Gasket, manufactured by Raytheon Co ESD Long Island Div, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-209-1073 has 1 manufacturer part number on file: 0374096-1 (Raytheon Co ESD Long Island Div).
Key specifications for 0374096-1: Cross-Sectional Thickness: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN; Inside Corner Radius: 0.030 INCHES NOMINAL IN; Hardness Rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL; Style Designator: NON-CIRCULAR. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.