PartsTable
Technical Data Sheet
Download PDF

0374096-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0374096-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ OVERALL, overall_width: 0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN, aperture_width: 0.631 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN, overall_length: 1.349 INCHES MINIMUM AND 1.365 INCHES MAXIMUM IN, aperture_length: 1.215 INCHES MINIMUM AND 1.223 INCHES MAXIMUM IN, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-209-1073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0374096-1
NSN: 5330-01-209-1073
FSC: 5330 — Packing and Gasket Materials
CAGE: 24587 — RAYTHEON CO ESD LONG ISLAND DIV (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ OVERALL
overall_width0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
aperture_width0.631 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN
overall_length1.349 INCHES MINIMUM AND 1.365 INCHES MAXIMUM IN
aperture_length1.215 INCHES MINIMUM AND 1.223 INCHES MAXIMUM IN
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
special_featuresROUND OR D-SHAPE CROSSSECTION
style_designatorNON-CIRCULAR
inside_corner_radius0.030 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.047 INCHES NOMINAL IN
cross-sectional_thickness0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5330-01-209-1073
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0374096-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.030 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988 TY 2 GR 70 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE WIDTH: 0.631 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.030 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25988 TY 2 GR 70 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.349 INCHES MINIMUM AND 1.365 INCHES MAXIMUM IN
OVERALL WIDTH0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
APERTURE WIDTH0.631 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
APERTURE LENGTH1.215 INCHES MINIMUM AND 1.223 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0374096-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0374096-1?
0374096-1 is a GASKET.
What is the NSN for 0374096-1?
0374096-1 is cataloged in the U.S. Government catalog under NSN 5330-01-209-1073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0374096-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.