The Gasket, cataloged under National Stock Number 5330-00-787-0203, is classified within Federal Supply Class 5330 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Cummins Inc.. Government technical data includes 7 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-787-0203 |
| Primary Part Number | 102992 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — No Item Name Available |
| Manufacturer | Cummins Inc. |
| Status | ACTIVE |
| Aperture Diameter | 2.065 INCHES MINIMUM AND 2.095 INCHES MAXIMUM IN |
| Outside Edge to Bolt Hole Center Distance Along Width | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Outside Corner Radius | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Center to Center Distance Between Bolt Holes Along Length | 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Center to Center Distance Between Bolt Holes Along Width | 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Hole Diameter | 0.335 INCHES MINIMUM AND 0.350 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Outside Edge to Bolt Hole Center Distance Along Length | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 102992 PRIMARY | Cummins Inc. (USA) |
NSN 5330-00-787-0203 is a Gasket, manufactured by Cummins Inc., classified under FSC 5330 (No Item Name Available). Status: active.
NSN 5330-00-787-0203 has 1 cross-referenced part number: 102992 (Cummins Inc.).
There are 3 known substitutes for 5330-00-787-0203: 5865-00-204-4278, 6515-00-363-8840, 2945-01-206-6552. Verify interchangeability with system specifications before substitution.
Key specifications for 102992: Aperture Diameter: 2.065 INCHES MINIMUM AND 2.095 INCHES MAXIMUM IN; Outside Edge to Bolt Hole Center Distance Along Width: 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN; Outside Corner Radius: 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN; Center to Center Distance Between Bolt Holes Along Length: 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN. 10 total characteristics are documented in the Federal Logistics Information System.