PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 533-17/64

533-17/64 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include height: 0.250 INCHES NOMINAL IN, diameter: 0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.125 INCHES NOMINAL IN, hardness_rating: 33.0 ROCKWELL C MINIMUM AND 57.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-266-7603, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
533-17/64
NSN: 5315-00-266-7603
FSC: 5315
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
diameter0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.125 INCHES NOMINAL IN
hardness_rating33.0 ROCKWELL C MINIMUM AND 57.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle10.0 DEGREES NOMINAL
pin_head_diameter1.000 INCHES NOMINAL IN
under_head_length1.500 INCHES NOMINAL IN
NSN5315-00-266-7603
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 533-17/64 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.125 INCHES NOMINAL IN
•
DIAMETER: 0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 1.500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
HEAD STYLE: FLAT
•
PIN CHAMFER ANGLE: 10.0 DEGREES NOMINAL
•
HEIGHT: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CHAMFER LENGTH0.125 INCHES NOMINAL IN
DIAMETER0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
UNDER HEAD LENGTH1.500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTRAIGHT
HEAD STYLEFLAT
PIN CHAMFER ANGLE10.0 DEGREES NOMINAL
HEIGHT0.250 INCHES NOMINAL IN
PIN HEAD DIAMETER1.000 INCHES NOMINAL IN
HARDNESS RATING33.0 ROCKWELL C MINIMUM AND 57.0 ROCKWELL C MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
712-000819Interchangeable
interchangeable cross-reference
interchangeable
205-429AInterchangeable
interchangeable cross-reference
interchangeable
30617Interchangeable
interchangeable cross-reference
interchangeable
48074DInterchangeable
Same NIIN cross-reference
interchangeable
5011-0265Interchangeable
Resistor,variable,wire Wound,non
interchangeable
4001/630-17/64Interchangeable
Resistor,variable,wire Wound,non
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 533-17/64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 533-17/64?
533-17/64 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 533-17/64?
There are 14 known substitutes for 533-17/64: 712-000819, 205-429A, 30617 and 11 more. Substitute compatibility should be verified for your specific system.
Is 533-17/64 still available?
533-17/64 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 533-17/64

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026