PartsTable
Technical Data Sheet
Download PDF

48074D — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

48074D: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, diameter: 0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.125 INCHES NOMINAL IN, hardness_rating: 33.0 ROCKWELL C MINIMUM AND 57.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-266-7603, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48074D
NSN: 5315-00-266-7603
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 29930 — INTERNATIONAL HARVESTER CO AGRICULTURAL EQUIPMENT DIV (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
diameter0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.125 INCHES NOMINAL IN
hardness_rating33.0 ROCKWELL C MINIMUM AND 57.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle10.0 DEGREES NOMINAL
pin_head_diameter1.000 INCHES NOMINAL IN
under_head_length1.500 INCHES NOMINAL IN
NSN5315-00-266-7603
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 48074D · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.125 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 1.500 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 10.0 DEGREES NOMINAL
•
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 57.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 1.000 INCHES NOMINAL IN
•
DIAMETER: 0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.125 INCHES NOMINAL IN
UNDER HEAD LENGTH1.500 INCHES NOMINAL IN
PIN CHAMFER ANGLE10.0 DEGREES NOMINAL
HARDNESS RATING33.0 ROCKWELL C MINIMUM AND 57.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER1.000 INCHES NOMINAL IN
DIAMETER0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
HEAD STYLEFLAT
HEIGHT0.250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
5331764Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 48074D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48074D?
48074D is a PIN,STRAIGHT,HEADED.
What parts can replace 48074D?
There is 1 known substitute for 48074D: 5331764. Substitute compatibility should be verified for your specific system.
What is the NSN for 48074D?
48074D is cataloged in the U.S. Government catalog under NSN 5315-00-266-7603. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48074D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.