The Grommet,nonmetallic, cataloged under National Stock Number 5325-01-051-1855, is classified within Federal Supply Class 5325 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Zf Industrieantriebe Witten Gmbh. Government technical data includes 15 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5325-01-051-1855 |
| Primary Part Number | MS35489-56S |
| Item Name | Grommet,nonmetallic |
| FSC / FSG | 5325 / 53 — No Item Name Available |
| Manufacturer | Zf Industrieantriebe Witten Gmbh |
| Status | ACTIVE |
| Flange Thickness | 0.1875 INCHES NOMINAL IN |
| Features Provided | COOLANT RESISTANT |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Departure From Cited Designator | AS DIFFERENTIATED BY PACKAGING IN ACCORDANCE WITH MIL-P-23199 AND MATERIAL CONFORMING TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| Criticality Code Justification | ZZZX |
| Groove Width | 0.125 INCHES NOMINAL IN |
| Material Document and Classification | MIL-STD-417,GRADE SB-515-A1,B1,C2,E3,F2 MIL STD SINGLE MATERIAL RESPONSE OVERALL |
| Large Flange Outside Diameter | 2.125 INCHES NOMINAL IN |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Material | RUBBER SYNTHETIC OVERALL |
| Hole Diameter | 1.500 INCHES NOMINAL IN |
| Nonmetallic Hardness Rating | 45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A |
| Grommet Construction Type | SOLID |
| Groove Outside Diameter | 1.750 INCHES NOMINAL IN |
| Grommet Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MS35489-56S | Zf Industrieantriebe Witten Gmbh (DEU) |
| MS35489-56 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5325-01-051-1855 is a Grommet,nonmetallic, manufactured by Zf Industrieantriebe Witten Gmbh, classified under FSC 5325 (No Item Name Available). Status: active.
NSN 5325-01-051-1855 has 2 cross-referenced part numbers: MS35489-56S (Zf Industrieantriebe Witten Gmbh), MS35489-56 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 5325-01-051-1855: 5325-00-285-3345. Verify interchangeability with system specifications before substitution.
Key specifications for MS35489-56S: Flange Thickness: 0.1875 INCHES NOMINAL IN; Features Provided: COOLANT RESISTANT; Test Data Document: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Departure From Cited Designator: AS DIFFERENTIATED BY PACKAGING IN ACCORDANCE WITH MIL-P-23199 AND MATERIAL CONFORMING TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS. 17 total characteristics are documented in the Federal Logistics Information System.