PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35489-56S

MS35489-56S — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.125 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 1.500 INCHES NOMINAL IN, overall_height: 0.500 INCHES NOMINAL IN, flange_thickness: 0.1875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5325-01-051-1855, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35489-56S
NSN: 5325-01-051-1855
FSC: 5325
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.125 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter1.500 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
flange_thickness0.1875 INCHES NOMINAL IN
special_featuresHOT OIL RESISTANT
features_providedCOOLANT RESISTANT
special_test_featuresSPECIAL QUALITY CONTROL TESTING
groove_outside_diameter1.750 INCHES NOMINAL IN
grommet_construction_typeSOLID
nonmetallic_hardness_rating45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
NSN5325-01-051-1855
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35489-56S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.1875 INCHES NOMINAL IN
•
FEATURES PROVIDED: COOLANT RESISTANT
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
DEPARTURE FROM CITED DESIGNATOR: AS DIFFERENTIATED BY PACKAGING IN ACCORDANCE WITH MIL-P-23199 AND MATERIAL CONFORMING TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
•
CRITICALITY CODE JUSTIFICATION: ZZZX
•
GROOVE WIDTH: 0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-417,GRADE SB-515-A1,B1,C2,E3,F2 MIL STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
FLANGE THICKNESS0.1875 INCHES NOMINAL IN
FEATURES PROVIDEDCOOLANT RESISTANT
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
DEPARTURE FROM CITED DESIGNATORAS DIFFERENTIATED BY PACKAGING IN ACCORDANCE WITH MIL-P-23199 AND MATERIAL CONFORMING TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
CRITICALITY CODE JUSTIFICATIONZZZX
GROOVE WIDTH0.125 INCHES NOMINAL IN
SPECIAL FEATURESHOT OIL RESISTANT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-STD-417,GRADE SB-515-A1,B1,C2,E3,F2 MIL STD SINGLE MATERIAL RESPONSE OVERALL
LARGE FLANGE OUTSIDE DIAMETER2.125 INCHES NOMINAL IN
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
359-1001P22InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1105InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
4138300-107InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS35489-56InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35489-56S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35489-56S?
MS35489-56S is a GROMMET,NONMETALLIC.
What parts can replace MS35489-56S?
There are 4 known substitutes for MS35489-56S: 359-1001P22, 1105, 4138300-107 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35489-56S?
MS35489-56S is cataloged in the Federal Logistics Information System under NSN 5325-01-051-1855. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35489-56S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026