PartsTable
Technical Data Sheet
Download PDF

5324868 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5324868: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN, housing_bore_diameter: 3.350 INCHES MINIMUM AND 3.354 INCHES MAXIMUM IN, sealing_element_style: VERTICAL-ANGULAR, accommodated_shaft_diameter: 2.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-350-7052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5324868
NSN: 5330-00-350-7052
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
housing_bore_diameter3.350 INCHES MINIMUM AND 3.354 INCHES MAXIMUM IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter2.375 INCHES NOMINAL IN
NSN5330-00-350-7052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5324868 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 3.350 INCHES MINIMUM AND 3.354 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
•
MATERIAL: WOOL SEALING ELEMENT A
TECHNICAL CHARACTERISTICS
SEAL WIDTH1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER3.350 INCHES MINIMUM AND 3.354 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
MATERIALWOOL SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 2
524296Reference document
Same NSN cross-reference
Reference document — Secondary reference
12080AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5324868?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5324868?
5324868 is a SEAL,PLAIN ENCASED.
What parts can replace 5324868?
There are 2 known substitutes for 5324868: 524296, 12080A. Substitute compatibility should be verified for your specific system.
What is the NSN for 5324868?
5324868 is cataloged in the U.S. Government catalog under NSN 5330-00-350-7052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5324868