PartsTable
Technical Data Sheet
Download PDF

524296 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

524296: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, corner_shape: SQUARE ALL CORNERS, flange_width: 0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM IN, overall_length: 0.2600 INCHES MINIMUM AND 0.2800 INCHES MAXIMUM IN, style_designator: SOLID, EXTERNAL FLANGE ONE END, body_inside_diameter: 0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-350-7052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
524296
NSN: 5330-00-350-7052
NIINs: 003507052, 009393515
FSC: 5330 — Packing and Gasket Materials
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
corner_shapeSQUARE ALL CORNERS
flange_width0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM IN
overall_length0.2600 INCHES MINIMUM AND 0.2800 INCHES MAXIMUM IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM IN
body_outside_diameter0.1930 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM IN
flange_outside_diameter0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM IN
NSN5330-00-350-7052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 524296 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 3.350 INCHES MINIMUM AND 3.354 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
•
MATERIAL: WOOL SEALING ELEMENT A
TECHNICAL CHARACTERISTICS
SEAL WIDTH1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER3.350 INCHES MINIMUM AND 3.354 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
MATERIALWOOL SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 1
12080AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 524296?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 524296?
524296 is a SEAL,PLAIN ENCASED.
What parts can replace 524296?
There is 1 known substitute for 524296: 12080A. Substitute compatibility should be verified for your specific system.
What is the NSN for 524296?
524296 is cataloged in the U.S. Government catalog under NSN 5330-00-350-7052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 524296