The Pin-Rivet, cataloged under National Stock Number 5320-01-696-2132, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-696-2132 |
| Primary Part Number | HL221PB6-14 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN |
| Fastener Length | 1.200 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.875 INCHES NOMINAL IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 3180 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 7100 DOUBLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP E4340 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.3765 INCHES MINIMUM AND 0.3803 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL221PB6-14 PRIMARY | Hi-Shear Corporation (USA) |
NSN 5320-01-696-2132 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-696-2132 has 1 manufacturer part number on file: HL221PB6-14 (Hi-Shear Corporation).
Key specifications for HL221PB6-14: Shank Diameter: 0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN; Fastener Length: 1.200 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 3RD MATERIAL RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.