HL221PB6-14 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL221PB6-14: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP E4340 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.875 INCHES NOMINAL IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-696-2132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL221PB6-14

NSN: 5320-01-696-2132
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP E4340 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.875 INCHES NOMINAL IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN
shear_strength	7100 DOUBLE POUNDS PER SQUARE INCH
fastener_length	1.200 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatment	CADMIUM AND CHROMATE OVERALL
head_major_diameter	0.3765 INCHES MINIMUM AND 0.3803 INCHES MAXIMUM IN
NSN	5320-01-696-2132

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.200 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 3RD MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.190 INCHES IN

•

GRIP LENGTH: 0.875 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN
FASTENER LENGTH	1.200 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.190 INCHES IN
GRIP LENGTH	0.875 INCHES NOMINAL IN
WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy HL221PB6-14?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL221PB6-14?

HL221PB6-14 is a PIN-RIVET.

What is the NSN for HL221PB6-14?

HL221PB6-14 is cataloged in the U.S. Government catalog under NSN 5320-01-696-2132. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL221PB6-14 — PIN-RIVET

Request a Quote — HL221PB6-14