The Pin,grooved,headless, cataloged under National Stock Number 5315-01-565-8762, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Naval Sea Systems Command. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-565-8762 |
| Primary Part Number | 7251584 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| Undercut Width | 0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN |
| First End Taper Length | 0.031 INCHES NOMINAL IN |
| Undercut Diameter | 0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| First End Location | GROOVED END |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Diameter | 0.372 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 2.031 INCHES MINIMUM AND 2.036 INCHES MAXIMUM IN |
| Second Undercut Width | 0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN |
| Material | STEEL CORROSION RESISTING OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7251584 PRIMARY | Naval Sea Systems Command (USA) |
NSN 5315-01-565-8762 is a Pin,grooved,headless, manufactured by Naval Sea Systems Command, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-565-8762 has 1 manufacturer part number on file: 7251584 (Naval Sea Systems Command).
Key specifications for 7251584: Undercut Width: 0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN; First End Taper Length: 0.031 INCHES NOMINAL IN; Undercut Diameter: 0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN; First End Location: GROOVED END. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.