PartsTable
Technical Data Sheet
Download PDF

7251584 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7251584: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.372 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, overall_length: 3.031 INCHES NOMINAL IN, undercut_width: 0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN, first_end_style: CHAMFERED, effective_length: 2.031 INCHES MINIMUM AND 2.036 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-565-8762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7251584
NSN: 5315-01-565-8762
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.372 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING OVERALL
overall_length3.031 INCHES NOMINAL IN
undercut_width0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
first_end_styleCHAMFERED
effective_length2.031 INCHES MINIMUM AND 2.036 INCHES MAXIMUM IN
style_designatorGROOVE
undercut_diameter0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
first_end_locationGROOVED END
first_end_taper_angle45.0 DEGREES NOMINAL
second_undercut_width0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
first_end_taper_length0.031 INCHES NOMINAL IN
NSN5315-01-565-8762
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7251584 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
FIRST END LOCATION: GROOVED END
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
DIAMETER: 0.372 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
FIRST END LOCATIONGROOVED END
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
DIAMETER0.372 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
OVERALL LENGTH3.031 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7251584?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7251584?
7251584 is a PIN,GROOVED,HEADLESS.
What is the NSN for 7251584?
7251584 is cataloged in the U.S. Government catalog under NSN 5315-01-565-8762. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7251584

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.