The Pin,straight,headed, cataloged under National Stock Number 5315-01-210-2034, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 17 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 5 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-210-2034 |
| Primary Part Number | MS35810-14 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Head Style | FLAT CHAMFER |
| Pin Chamfer Angle | 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| Style Designator | STRAIGHT |
| Height | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| Hardness Rating | 70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL |
| Material Document and Classification | FED-STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Material | STEEL COMP 1010 OVERALL |
| Surface Treatment | CADMIUM OVERALL |
| Hole Arrangement Style | ONE END DRILLED |
| Distance From Centerline of Hole to End of Pin | 0.124 INCHES NOMINAL IN |
| Diameter | 0.368 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN |
| Under Head Length | 0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN |
| Pin Head Diameter | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First Hole Diameter | 0.104 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN |
| Chamfer Length | 0.078 INCHES NOMINAL IN |
| Shear Strength | 41000 DOUBLE POUNDS PER SQUARE INCH |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MS35810-14 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| F251 | Tld Ace Corp Div Tld Ace (USA) |
NSN 5315-01-210-2034 is a Pin,straight,headed, manufactured by Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-01-210-2034 has 2 cross-referenced part numbers: MS35810-14 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), F251 (Tld Ace Corp Div Tld Ace).
There are 5 known substitutes for 5315-01-210-2034: 6610-00-132-1358, 5945-00-230-5060, 6110-00-890-3025 and 2 more. Verify interchangeability with system specifications before substitution.
Key specifications for MS35810-14: Head Style: FLAT CHAMFER; Pin Chamfer Angle: 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM; Style Designator: STRAIGHT; Height: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN. 17 total characteristics are documented in the Federal Logistics Information System.