The Pin,straight,headless, cataloged under National Stock Number 5315-00-009-3833, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is E-Systems Inc Montek Div Fluid Controls Opns. Government technical data includes 11 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-009-3833 |
| Primary Part Number | 17219 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | E-Systems Inc Montek Div Fluid Controls Opns |
| Status | ACTIVE |
| First End Style | CHAMFERED |
| First End Taper Length | 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN |
| Pin Overall Length | 0.350 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN |
| Pin Overall Diameter | 0.0942 INCHES MINIMUM AND 0.0945 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Second End Relationship with First End | IDENTICAL |
| Material | STEEL COMP 630 OVERALL |
| Surface Finish | 125.0 MICROINCHES OVERALL |
| Surface Treatment | PASSIVATE OVERALL |
| Material Document and Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 5315-00-009-3833 is a Pin,straight,headless, manufactured by E-Systems Inc Montek Div Fluid Controls Opns, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-00-009-3833 has 4 cross-referenced part numbers: 17219 (E-Systems Inc Montek Div Fluid Controls Opns), 17219 (Moog Inc), 17219 (Moog Inc Div Moog Inc., Space and Defense - Salt Lake City), 17219 (Mid-America Aerotech, Llc).
There are 6 known substitutes for 5315-00-009-3833: 5935-00-455-8537, 5136-00-528-2300, 5330-00-621-4058 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for 17219: First End Style: CHAMFERED; First End Taper Length: 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN; Pin Overall Length: 0.350 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN; Pin Overall Diameter: 0.0942 INCHES MINIMUM AND 0.0945 INCHES MAXIMUM IN. 11 total characteristics are documented in the Federal Logistics Information System.