PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17219
17219 ✓ Verified by PartsTable
Clementoni · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONNECTOR,RECEPTACLE,ELECTRICAL is a Clementoni industrial component. Key specifications include length: 0.688 INCHES NOMINAL SQUARE END IN, material: GLASS OVERALL, body_style: STRAIGHT SHAPE, EXTERNAL COUPLING, body_width: 0.100 INCHES NOMINAL IN, body_height: 0.215 INCHES NOMINAL IN, body_length: 0.200 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-009-3833, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17219
NSN: 5315-00-009-3833
FSC: 5315
CAGE: 79294 — E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS (USA)
SPECIFICATIONS
length0.688 INCHES NOMINAL SQUARE END IN
materialGLASS OVERALL
body_styleSTRAIGHT SHAPE, EXTERNAL COUPLING
body_width0.100 INCHES NOMINAL IN
body_height0.215 INCHES NOMINAL IN
body_length0.200 INCHES NOMINAL IN
thread_class2A A
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
terminal_typeSOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
thread_length2.000 INCHES NOMINAL IN
coil_form_typeSOLID SINGLE COMPONENT
flute_quantity4
NSN5315-00-009-3833
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 17219 · Clementoni ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.350 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN
•
PIN OVERALL DIAMETER: 0.0942 INCHES MINIMUM AND 0.0945 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL COMP 630 OVERALL
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.350 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN
PIN OVERALL DIAMETER0.0942 INCHES MINIMUM AND 0.0945 INCHES MAXIMUM IN
TEST DATA DOCUMENT81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 630 OVERALL
SURFACE FINISH125.0 MICROINCHES OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
427353-1Interchangeable
interchangeable cross-reference
interchangeable
29042CSInterchangeable
interchangeable cross-reference
interchangeable
580R763H01Interchangeable
interchangeable cross-reference
interchangeable
B94.9Interchangeable
interchangeable cross-reference
interchangeable
B94.9 3/4-10 UNC HS C H2Interchangeable
interchangeable cross-reference
interchangeable
17219Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17219?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17219?
17219 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Clementoni.
What parts can replace 17219?
There are 10 known substitutes for 17219: 427353-1, 29042CS, 580R763H01 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17219?
17219 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-009-3833. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17219

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026