PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5310X1C09
5310X1C09 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 50.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 1.7500 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3086, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310X1C09
NSN: 3110-00-554-3086
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter50.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width1.7500 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter110.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
internal_fit-up_contact_angular_directionOUTWARD CONVERGENT
NSN3110-00-554-3086
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5310X1C09 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
BORE DIAMETER: 50.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONANGULAR
BORE DIAMETER50.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
OVERALL WIDTH1.7500 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL OUTSIDE DIAMETER110.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
38201Interchangeable
interchangeable cross-reference
interchangeable
BS4-1575P19Interchangeable
interchangeable cross-reference
interchangeable
34-135-1Interchangeable
interchangeable cross-reference
interchangeable
5306Interchangeable
interchangeable cross-reference
interchangeable
7903180Interchangeable
interchangeable cross-reference
interchangeable
5305HInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5310X1C09?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310X1C09?
5310X1C09 is a BEARING,BALL,ANNULAR.
What parts can replace 5310X1C09?
There are 20 known substitutes for 5310X1C09: 38201, BS4-1575P19, 34-135-1 and 17 more. Substitute compatibility should be verified for your specific system.
Is 5310X1C09 still available?
5310X1C09 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310X1C09

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026