PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305H
5305H ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, overall_width: 1.0000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5433, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305H
NSN: 3110-00-156-5433
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width1.0000 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
internal_fit-up_contact_angular_directionOUTWARD CONVERGENT
NSN3110-00-156-5433
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5305H · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OUTER RACE
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
NONDEFINITIVE SPEC/STD DATA: 146 TYPE AND 00 GRADE
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL WIDTH1.0000 INCHES NOMINAL IN
MATERIALSTEEL OUTER RACE
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
NONDEFINITIVE SPEC/STD DATA146 TYPE AND 00 GRADE
MATERIALSTEEL INNER RACE
MATERIALSTEEL BALL
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
BORE SHAPESTRAIGHT
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
9451Interchangeable
interchangeable cross-reference
interchangeable
1377-M275Interchangeable
interchangeable cross-reference
interchangeable
M1A1Interchangeable
interchangeable cross-reference
interchangeable
7120-3Interchangeable
Plate an-Ap,-6
interchangeable
615845-3Interchangeable
Plate an-Ap,-6
interchangeable
1A4594Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305H?
5305H is a BEARING,BALL,ANNULAR.
What parts can replace 5305H?
There are 26 known substitutes for 5305H: 9451, 1377-M275, M1A1 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305H?
5305H is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5433. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026