The Nut,plain,round, cataloged under National Stock Number 5310-00-522-0483, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-522-0483 |
| Primary Part Number | 8465607P1 |
| Item Name | Nut,plain,round |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Thread Series | UN |
| Hole Configuration Style | CONFIGURATION J |
| Drive Point Width | 0.1825 INCHES MINIMUM AND 0.1925 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.750 INCHES IN |
| Nut Diameter | 1.5475 INCHES MINIMUM AND 1.5675 INCHES MAXIMUM IN |
| Drive Point Depth | 0.0737 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN |
| Undercut Thickness | 0.188 INCHES NOMINAL IN |
| Nut Thickness | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Small End Diameter | 1.265 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN |
| Drilled Hole Diameter | 0.125 INCHES NOMINAL IN |
| Drive Point Quantity | 4 |
| Nut Style | ROUND |
| Thread Class | 3B |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Hole Type and Quantity | 2 DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5310-00-522-0483 is a Nut,plain,round, manufactured by General Electric Company, classified under FSC 5310, Nuts and Washers. Status: active.
NSN 5310-00-522-0483 has 2 manufacturer part numbers on file: 8465607P1 (General Electric Company), 8465607P1 (General Electric Co Direct Current Motor and Generator Dept).
Key specifications for 8465607P1: Thread Series: UN; Hole Configuration Style: CONFIGURATION J; Drive Point Width: 0.1825 INCHES MINIMUM AND 0.1925 INCHES MAXIMUM IN; Thread Direction: RIGHT-HAND. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.