PartsTable
Technical Data Sheet
Download PDF

8465607P1 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8465607P1: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 1.5475 INCHES MINIMUM AND 1.5675 INCHES MAXIMUM IN, thread_class: 3B, nut_thickness: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-522-0483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8465607P1
NSN: 5310-00-522-0483
FSC: 5310 — Nuts and Washers
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter1.5475 INCHES MINIMUM AND 1.5675 INCHES MAXIMUM IN
thread_class3B
nut_thickness0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_seriesUN
thread_directionRIGHT-HAND
drive_point_depth0.0737 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
drive_point_width0.1825 INCHES MINIMUM AND 0.1925 INCHES MAXIMUM IN
small_end_diameter1.265 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN
undercut_thickness0.188 INCHES NOMINAL IN
nominal_thread_size0.750 INCHES IN
NSN5310-00-522-0483
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8465607P1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
HOLE CONFIGURATION STYLE: CONFIGURATION J
•
DRIVE POINT WIDTH: 0.1825 INCHES MINIMUM AND 0.1925 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT DIAMETER: 1.5475 INCHES MINIMUM AND 1.5675 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.0737 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
•
UNDERCUT THICKNESS: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
HOLE CONFIGURATION STYLECONFIGURATION J
DRIVE POINT WIDTH0.1825 INCHES MINIMUM AND 0.1925 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT DIAMETER1.5475 INCHES MINIMUM AND 1.5675 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.0737 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
UNDERCUT THICKNESS0.188 INCHES NOMINAL IN
NUT THICKNESS0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
SMALL END DIAMETER1.265 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 8465607P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8465607P1?
8465607P1 is a NUT,PLAIN,ROUND.
What is the NSN for 8465607P1?
8465607P1 is cataloged in the U.S. Government catalog under NSN 5310-00-522-0483. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8465607P1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.