The Bolt,shear, cataloged under National Stock Number 5306-01-131-2913, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 11 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-131-2913 |
| Primary Part Number | VS3190-6-16 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Howmet Global Fastening Systems Inc |
| Status | ACTIVE |
| Extended Washer Thickness | 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN |
| Head Height | 0.263 INCHES MINIMUM AND 0.303 INCHES MAXIMUM IN |
| Fastener Length | 1.599 INCHES MINIMUM AND 1.629 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN |
| Thread Length | 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Grip Diameter | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MB156-6-16 | Hi-Shear Corporation (USA) |
| 5306-01-131-2913 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HP7753-6-16 | Heartland Precision Fasteners Inc (USA) |
| VFK600-6-16 | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| PBF1267-6-16 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| VS3190-6-16 PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| S343-6-16 PRIMARY | Huck International, Inc (USA) |
| MB156-6-16 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| AIC763-6-16 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| ST3M753-6-16 | Fastener Innovation Technology, Inc. Dba F I T (USA) |
| GS1032-6-16 | B & B Specialties Inc Dba Gs Aerospace Div Gs Aerospace (USA) |
| Reference | Meaning |
|---|---|
| S343-6-16 | 5/9 Secondary reference U.S. Government activity |
| VS3190-6-16 | 5/9 Secondary reference U.S. Government activity |
| 10163817 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| 122897-6-16 | 5/2 Secondary reference U.S. Government activity |
| ST3M753-6-16 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
| 122897-6-16 | 5/9 Secondary reference Sps Technologies Inc |
NSN 5306-01-131-2913 is a Bolt,shear, manufactured by Howmet Global Fastening Systems Inc, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-131-2913 has 11 manufacturer part numbers on file: MB156-6-16 (Hi-Shear Corporation), 5306-01-131-2913 (Sps Technologies, Llc Dba PB Fasteners), HP7753-6-16 (Heartland Precision Fasteners Inc), VFK600-6-16 (Valley-Todeco, Inc. Dba Arconic Fastening Systems), PBF1267-6-16 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners) and 6 more.
Key specifications for VS3190-6-16: Extended Washer Thickness: 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN; Head Height: 0.263 INCHES MINIMUM AND 0.303 INCHES MAXIMUM IN; Fastener Length: 1.599 INCHES MINIMUM AND 1.629 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.