The Bolt,clevis, cataloged under National Stock Number 5306-00-151-1966, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 21 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-151-1966 |
| Primary Part Number | AN23-14 |
| Item Name | Bolt,clevis |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE IN |
| Head Height | 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Thread Length | 0.324 INCHES MINIMUM AND 0.364 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE IN |
| Fastener Length | 0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM IN |
| Internal Drive Style | SLOT |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Departure From Cited Document | THREAD T PER M1L-S-7742 EXCEPT MAJOR D1A IS NOT TO EXCEED MAX ALLOW BOLT SHANK D1A |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Groove Diameter | 0.141 INCHES NOMINAL IN |
| Head Style | BUTTON |
| Thread Direction | RIGHT-HAND |
| Material Document and Classification | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| Head Diameter | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Material | STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN23-14 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| 5306PL1035073 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
NSN 5306-00-151-1966 is a Bolt,clevis, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5306 (No Item Name Available). Status: active.
NSN 5306-00-151-1966 has 2 cross-referenced part numbers: AN23-14 (Aeronautical Standards Group Dept of Navy and Air Force), 5306PL1035073 (Jednolity Indeks Materialowy - Uniform Material Index).
There is 1 known substitute for 5306-00-151-1966: 5325-00-513-1726. Verify interchangeability with system specifications before substitution.
Key specifications for AN23-14: Thread Class: 3A A; Thread Quantity Per Inch: 32; Thread Series Designator: UNF; Distance From Head Largest Bearing Surface to Shank Hole Center: 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE IN. 21 total characteristics are documented in the Federal Logistics Information System.