PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN23-14
AN23-14 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,CLEVIS is a the manufacturer industrial component. Key specifications include special_features: (7/16) DIA ROUND BRASS ROD, FREE CUTTING, part_name_assigned_by_controlling_agency: GROMMET,DRAINAGE PLASTIC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1966, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN23-14
NSN: 5306-00-151-1966
FSC: 5306
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
special_features(7/16) DIA ROUND BRASS ROD, FREE CUTTING
part_name_assigned_by_controlling_agencyGROMMET,DRAINAGE PLASTIC
NSN5306-00-151-1966
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN23-14 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A A
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES DESIGNATOR: UNF
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE IN
•
HEAD HEIGHT: 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH LBS
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3A A
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNF
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE IN
HEAD HEIGHT0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD LENGTH0.324 INCHES MINIMUM AND 0.364 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1093-4Interchangeable
interchangeable cross-reference
interchangeable
AN231-4Interchangeable
interchangeable cross-reference
interchangeable
5306PL1035073Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN23-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN23-14?
AN23-14 is a BOLT,CLEVIS.
What parts can replace AN23-14?
There are 3 known substitutes for AN23-14: 1093-4, AN231-4, 5306PL1035073. Substitute compatibility should be verified for your specific system.
What is the NSN for AN23-14?
AN23-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1966. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN23-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026