PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL1038902
5305PL1038902 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, head_style: FLAT CHAMFER, head_height: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 0.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-992-5854, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL1038902
NSN: 5305-00-992-5854
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
head_styleFLAT CHAMFER
head_height0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length0.375 INCHES MAXIMUM IN
fastener_length0.375 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-00-992-5854
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL1038902 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY CONDITION A
•
FASTENER LENGTH: 0.375 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
•
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH LBS
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL: STEEL COMP 304 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY CONDITION A
FASTENER LENGTH0.375 INCHES MAXIMUM IN
HEAD HEIGHT0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA6 TYPE
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH LBS
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL
MATERIALSTEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TEST DATA DOCUMENT81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). OR 96906-MS16995-25 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
5305PL1449517Interchangeable
interchangeable cross-reference
interchangeable
200021-6Interchangeable
interchangeable cross-reference
interchangeable
280-615-0806Interchangeable
interchangeable cross-reference
interchangeable
MS16995-25Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL1038902?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL1038902?
5305PL1038902 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 5305PL1038902?
There are 4 known substitutes for 5305PL1038902: 5305PL1449517, 200021-6, 280-615-0806 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL1038902?
5305PL1038902 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-992-5854. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL1038902

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026