PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL1449517
5305PL1449517 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL, head_style: FLAT CHAMFER, head_height: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-988-7601, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL1449517
NSN: 5305-00-988-7601
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
head_styleFLAT CHAMFER
head_height0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fastener_length0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
hardness_rating80.0 ROCKWELL B MINIMUM OVERALL
special_featuresITEM DOES NOT HAVE A NUCLEAR HARDENED FEATURE BUT DOES HAVE OTHER CRITICAL FEATURES SUCH AS TOLERANCE,FIT RESTRICTION OR APPLICATION
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5305-00-988-7601
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL1449517 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: HEXAGON
•
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLEHEXAGON
HEAD HEIGHT0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA6 TYPE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD DIAMETER0.164 INCHES IN
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH LBS
END ITEM IDENTIFICATIONA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
WIDTH ACROSS FLATS0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
1-0109Interchangeable
interchangeable cross-reference
interchangeable
J3E1Interchangeable
interchangeable cross-reference
interchangeable
1-0106Interchangeable
interchangeable cross-reference
interchangeable
CG4R7D-NP0Interchangeable
interchangeable cross-reference
interchangeable
07100060AInterchangeable
interchangeable cross-reference
interchangeable
DTZ4R7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL1449517?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL1449517?
5305PL1449517 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 5305PL1449517?
There are 21 known substitutes for 5305PL1449517: 1-0109, J3E1, 1-0106 and 18 more. Substitute compatibility should be verified for your specific system.
Is 5305PL1449517 still available?
5305PL1449517 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL1449517

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026