PartsTable
Technical Data Sheet
Download PDF

5305PL0725642 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5305PL0725642: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, thread_length: 0.341 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN, fastener_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-499-7694, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL0725642
NSN: 5305-00-499-7694
FSC: 5305 — Screws
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
head_stylePAN
head_height0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
thread_length0.341 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM FASTENER
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
internal_drive_styleCROSS RECESS TYPE 1
primary_washer_styleFLAT EXTERNAL TEETH
NSN5305-00-499-7694
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL0725642 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: G-4252M,FSCM 24617 MFR REF ALL TREATMENT RESPONSES OVERALL
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.341 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM FASTENER
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES PRIMARY WASHER
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONG-4252M,FSCM 24617 MFR REF ALL TREATMENT RESPONSES OVERALL
PRIMARY WASHER OUTSIDE DIAMETER0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
THREAD LENGTH0.341 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM FASTENER
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES FASTENER
NOMINAL THREAD DIAMETER0.250 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 5
191985Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
454542Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
7539392Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
FF-S-92Reference document
Same NSN cross-reference
Reference document — Identification reference
973551Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5305PL0725642?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL0725642?
5305PL0725642 is a SCREW,ASSEMBLED WASHER.
What parts can replace 5305PL0725642?
There are 5 known substitutes for 5305PL0725642: 191985, 454542, 7539392 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL0725642?
5305PL0725642 is cataloged in the U.S. Government catalog under NSN 5305-00-499-7694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL0725642

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.