The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-630-7541, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Fastener Technology Corp. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-630-7541 |
| Primary Part Number | FTD7101HHS-10-10-12 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Fastener Technology Corp |
| Status | ACTIVE |
| Head Height | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Fastener Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Thread Length | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Hole Configuration Style | ROUND INTERNAL HEXAGON |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 2425 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.155 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| FTD7101HHS-10-10-12 PRIMARY | Fastener Technology Corp (USA) |
NSN 5305-01-630-7541 is a Screw,cap,hexagon Head, manufactured by Fastener Technology Corp, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-630-7541 has 1 manufacturer part number on file: FTD7101HHS-10-10-12 (Fastener Technology Corp).
Key specifications for FTD7101HHS-10-10-12: Head Height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Fastener Length: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN; Thread Length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN; Hole Configuration Style: ROUND INTERNAL HEXAGON. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.