PartsTable
Technical Data Sheet
Download PDF

FTD7101HHS-10-10-12 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FTD7101HHS-10-10-12: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include hole_type: DRILLED, head_style: HEXAGON, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, hole_diameter: 0.155 INCHES NOMINAL IN, thread_length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-630-7541, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTD7101HHS-10-10-12
NSN: 5305-01-630-7541
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
hole_typeDRILLED
head_styleHEXAGON
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class3A A
hole_diameter0.155 INCHES NOMINAL IN
hole_quantity1
thread_length0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
fastener_length0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
nominal_thread_diameter0.1900 INCHES IN
NSN5305-01-630-7541
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FTD7101HHS-10-10-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
HOLE CONFIGURATION STYLE: ROUND INTERNAL HEXAGON
•
NOMINAL THREAD DIAMETER: 0.1900 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
THREAD LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
HOLE CONFIGURATION STYLEROUND INTERNAL HEXAGON
NOMINAL THREAD DIAMETER0.1900 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH2425 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FTD7101HHS-10-10-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTD7101HHS-10-10-12?
FTD7101HHS-10-10-12 is a SCREW,CAP,HEXAGON HEAD.
What is the NSN for FTD7101HHS-10-10-12?
FTD7101HHS-10-10-12 is cataloged in the U.S. Government catalog under NSN 5305-01-630-7541. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTD7101HHS-10-10-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.