The Screw,close Tolerance, cataloged under National Stock Number 5305-01-298-7338, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-298-7338 |
| Primary Part Number | H044-7-13 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 1.325 INCHES MINIMUM AND 1.355 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.503 INCHES MINIMUM AND 0.553 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.438 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN |
| Grip Diameter | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.825 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| PBF1165-7-13 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| 121557-7A13 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| VT1693-7-13 | Howmet Global Fastening Systems Inc (USA) |
| H044-7-13 PRIMARY | Huck International, Inc (USA) |
| AIC984-7-13 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| Reference | Meaning |
|---|---|
| H044-7-13 | 5/9 Secondary reference U.S. Government activity |
| 5305PL1944817 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| VT1693-7-13 | 5/9 Secondary reference U.S. Government activity |
| 121557-7A13 | 3/2 Design control — primary reference U.S. Government activity |
| C7984-7-13 | 7/2 Vendor item drawing reference U.S. Government activity |
| 5305PL0784893 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5305-01-298-7338 is a Screw,close Tolerance, manufactured by Huck International, Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-298-7338 has 5 manufacturer part numbers on file: PBF1165-7-13 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), 121557-7A13 (Sps Technologies, Llc Dba PB Fasteners), VT1693-7-13 (Howmet Global Fastening Systems Inc), H044-7-13 (Huck International, Inc), AIC984-7-13 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company).
Key specifications for H044-7-13: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 1.325 INCHES MINIMUM AND 1.355 INCHES MAXIMUM IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.