PartsTable
Technical Data Sheet
Download PDF

AIC984-7-13 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AIC984-7-13: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, head_diameter: 0.825 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-298-7338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AIC984-7-13
NSN: 5305-01-298-7338
FSC: 5305 — Screws
CAGE: 06725 — SPS TECHNOLOGIES, LLC DBA AIR INDUSTRIES COMPANY DIV AIR INDUSTRIES COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
head_diameter0.825 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
thread_length0.503 INCHES MINIMUM AND 0.553 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES GRIP
fastener_length1.325 INCHES MINIMUM AND 1.355 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
NSN5305-01-298-7338
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AIC984-7-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
FASTENER LENGTH: 1.325 INCHES MINIMUM AND 1.355 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.503 INCHES MINIMUM AND 0.553 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
FASTENER LENGTH1.325 INCHES MINIMUM AND 1.355 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.503 INCHES MINIMUM AND 0.553 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.438 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 7
PBF1165-7-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H044-7-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
121557-7A13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
VT1693-7-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5305PL1944817Reference document
Same NSN cross-reference
Reference document — Informative reference only
C7984-7-13Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AIC984-7-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AIC984-7-13?
AIC984-7-13 is a SCREW,CLOSE TOLERANCE.
What parts can replace AIC984-7-13?
There are 7 known substitutes for AIC984-7-13: PBF1165-7-13, H044-7-13, 121557-7A13 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AIC984-7-13?
AIC984-7-13 is cataloged in the U.S. Government catalog under NSN 5305-01-298-7338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AIC984-7-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.