The Screw,close Tolerance, cataloged under National Stock Number 5305-01-282-4792, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-282-4792 |
| Primary Part Number | ST3M714-3D5 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | The Boeing Company Div Defense |
| Status | ACTIVE |
| Fastener Length | 0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Grip Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HT4049-3D5 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| 11931-3D5 | Reid Products Inc. Dba Reid Products Inc (USA) |
| ST3M714-3D5 PRIMARY | The Boeing Company Div Defense (USA) |
| HT4049-3D5 | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| HT4049-3D5 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| HT4049-3D5 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
NSN 5305-01-282-4792 is a Screw,close Tolerance, manufactured by The Boeing Company Div Defense, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-282-4792 has 4 manufacturer part numbers on file: HT4049-3D5 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), 11931-3D5 (Reid Products Inc. Dba Reid Products Inc), ST3M714-3D5 (The Boeing Company Div Defense), HT4049-3D5 (Hi-Shear Corporation).
Key specifications for ST3M714-3D5: Fastener Length: 0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.