PartsTable
Technical Data Sheet
Download PDF

11931-3D5 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11931-3D5: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-282-4792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11931-3D5
NSN: 5305-01-282-4792
FSC: 5305 — Screws
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
fastener_length0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-01-282-4792
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11931-3D5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
GRIP DIAMETER0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
HT4049-3D5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11931-3D5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11931-3D5?
11931-3D5 is a SCREW,CLOSE TOLERANCE.
What parts can replace 11931-3D5?
There is 1 known substitute for 11931-3D5: HT4049-3D5. Substitute compatibility should be verified for your specific system.
What is the NSN for 11931-3D5?
11931-3D5 is cataloged in the U.S. Government catalog under NSN 5305-01-282-4792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11931-3D5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.