PartsTable TECHNICAL DATA SHEET
NSN 5305-01-218-3125Government record, cited

Screw, Machine5305-01-218-3125

NSN 5305-01-218-3125 · NIIN 012183125 · Part number SK-6007-9
Gse Management Co · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 0EAK3
Government record, cited
NSN 5305-01-218-3125 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-218-3125. Manufacturer of record part number: SK-6007-9.
Also searched as  5305-01-218-3125 · 5305012183125 · NIIN 012183125 · 01-218-3125 · FSC 5305 Screws · CAGE 0EAK3 · SK-6007-9 · MS35190-333 · FF-S-92 · MS35190-333
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Screw Surface Treatment: CADMIUM AND CHROMATE
  • Fastener Length: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
  • Screw Material Document and Classification: 66 FED STD SINGLE MATERIAL RESPONSE
  • Thread Length: 1.072 INCHES MINIMUM AND 1.277 INCHES MAXIMUM IN
  • Nominal Thread Diameter: 0.438 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-01-218-3125
  • NIIN: 012183125
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: SK-6007-9
  • Manufacturer: Gse Management Co
General Description

The Screw,machine, cataloged under National Stock Number 5305-01-218-3125, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Gse Management Co. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-218-3125
Primary Part NumberSK-6007-9
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
ManufacturerGse Management Co
StatusACTIVE
Screw Surface TreatmentCADMIUM AND CHROMATE
Fastener Length1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
Screw Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE
Thread Length1.072 INCHES MINIMUM AND 1.277 INCHES MAXIMUM IN
Nominal Thread Diameter0.438 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Nondefinitive Spec/std Data3 TYPE AND 2C STYLE
Screw MaterialSTEEL
Minimum Tensile Strength60000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE 1
Countersink Angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
Thread Class2A A
Thread Quantity Per Inch14
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Head Diameter0.723 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
Screw Surface Treatment Document and ClassificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TYPE 2,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
SK-6007-9 PRIMARY Gse Management Co (USA)
Reference documents
ReferenceMeaning
MS35190-333 3/2 Design control — primary reference
U.S. Government activity
FF-S-92 4/1 Identification reference
U.S. Government activity
MS35190-333 5/9 Secondary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5305-01-218-3125?

NSN 5305-01-218-3125 is a Screw,machine, manufactured by Gse Management Co, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-218-3125?

NSN 5305-01-218-3125 has 1 manufacturer part number on file: SK-6007-9 (Gse Management Co).

What are the specifications of SK-6007-9?

Key specifications for SK-6007-9: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN; Screw Material Document and Classification: 66 FED STD SINGLE MATERIAL RESPONSE; Thread Length: 1.072 INCHES MINIMUM AND 1.277 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-218-3125 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com