PartsTable
Technical Data Sheet
Download PDF

SK-6007-9 — SCREW,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SK-6007-9: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.723 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN, thread_length: 1.072 INCHES MINIMUM AND 1.277 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-851-2682, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SK-6007-9
NSN: 5310-00-851-2682
NIINs: 008512682, 012183125
FSC: 5310 — Nuts and Washers
CAGE: 0EAK3 — GSE MANAGEMENT CO (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.723 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
thread_length1.072 INCHES MINIMUM AND 1.277 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.438 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5310-00-851-2682
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SK-6007-9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HARDNESS RATING: 95.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 5 STYLE AND B GRADE
•
NUT HEIGHT: 0.210 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING95.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 5 STYLE AND B GRADE
NUT HEIGHT0.210 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 10
0251267Reference document
Same NSN cross-reference
Reference document — Secondary reference
0309491Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310008512682Reference document
Same NSN cross-reference
Reference document — Informative reference only
5310PL0890455Reference document
Same NSN cross-reference
Reference document — Informative reference only
196826PC11Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
3404-6ITEM 82Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy SK-6007-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SK-6007-9?
SK-6007-9 is a SCREW,MACHINE.
What parts can replace SK-6007-9?
There are 10 known substitutes for SK-6007-9: 0251267, 0309491, 5310008512682 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SK-6007-9?
SK-6007-9 is cataloged in the U.S. Government catalog under NSN 5310-00-851-2682. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SK-6007-9