The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-992-5854, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Jednolity Indeks Materialowy - Uniform Material Index. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-992-5854 |
| Primary Part Number | 5305PL1038902 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Jednolity Indeks Materialowy - Uniform Material Index |
| Status | ACTIVE |
| Head Diameter | 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Departure From Cited Designator | AS MODIFIED BY CONDITION A |
| Fastener Length | 0.375 INCHES MAXIMUM IN |
| Head Height | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 6 TYPE |
| Minimum Yield Strength | 30000 POUNDS PER SQUARE INCH LBS |
| Hardness Rating | 35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| Material | STEEL COMP 304 OVERALL |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Test Data Document | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). OR 96906-MS16995-25 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Thread Length | 0.375 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Width Across Flats | 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN |
| Internal Drive Style | HEXAGON |
| Head Style | FLAT CHAMFER |
| Departure From Cited Document | AS MODIFIED BY MATERIAL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 5305PL1038902 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
| MS16995-25 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5305-00-992-5854 is a Screw,cap,socket Head, manufactured by Jednolity Indeks Materialowy - Uniform Material Index, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-00-992-5854 has 2 cross-referenced part numbers: 5305PL1038902 (Jednolity Indeks Materialowy - Uniform Material Index), MS16995-25 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 5305-00-992-5854: 5305-00-988-7601. Verify interchangeability with system specifications before substitution.
Key specifications for 5305PL1038902: Head Diameter: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN; Departure From Cited Designator: AS MODIFIED BY CONDITION A; Fastener Length: 0.375 INCHES MAXIMUM IN; Head Height: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN. 22 total characteristics are documented in the Federal Logistics Information System.