The Screw,machine, cataloged under National Stock Number 5305-00-660-2625, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Bell Textron Inc. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 9 commercial cross-references from 7 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5305-00-660-2625 |
| Primary Part Number | MS35265-47 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Bell Textron Inc |
| Status | CANCELLED |
| Screw Material | STEEL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Hole Configuration Style | ROUND |
| Thread Quantity Per Inch | 32 |
| Thread Length | 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Head Diameter | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Fastener Length | 0.750 INCHES NOMINAL IN |
| Head Height | 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| Head Style | FILLISTER |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Hole Quantity | 1 |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 33029C | Zf Industrieantriebe Witten Gmbh (DEU) |
| MS35265-47 PRIMARY | Bell Textron Inc (USA) |
| AN500A8-12 | Air Force-Navy Aeronautical Specifications Promulgated by Aeronautical Standards Group |
| MS35265-47 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MS35263-4 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MX-261193-3 PIECE 63 | The Babcock & Wilcox Company Dba B & W Service Co Div B&w Service Company (USA) |
| 10194088 | Nimikkeistokeskus Ncb Finland (FIN) |
| MS35269-47 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| 5305PL0721306 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
NSN 5305-00-660-2625 is a Screw,machine, manufactured by Bell Textron Inc, classified under FSC 5305 (No Item Name Available). Status: cancelled.
NSN 5305-00-660-2625 has 9 cross-referenced part numbers: 33029C (Zf Industrieantriebe Witten Gmbh), MS35265-47 (Bell Textron Inc), AN500A8-12 (Air Force-Navy Aeronautical Specifications Promulgated by Aeronautical Standards Group), MS35265-47 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), MS35263-4 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M) and 4 more.
There are 2 known substitutes for 5305-00-660-2625: 5305-00-151-0369, 5305-00-290-2768. Verify interchangeability with system specifications before substitution.
Key specifications for MS35265-47: Screw Material: STEEL; Thread Series Designator: UNIFIED NATIONAL COARSE (UNC); Nominal Thread Diameter: 0.164 INCHES IN; Head Hole Configuration Style: ROUND. 19 total characteristics are documented in the Federal Logistics Information System.
NSN 5305-00-660-2625 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.