The Screw,machine, cataloged under National Stock Number 5305-00-151-0369, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-151-0369 |
| Primary Part Number | AN500A8-12 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Head Height | 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN |
| Hole Diameter | 0.047 INCHES NOMINAL IN |
| Screw Material | STEEL COMP 1010 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Internal Drive Style | SLOT |
| Screw Surface Treatment | CADMIUM |
| Head Style | FILLISTER |
| Head Diameter | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Thread Length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 1 TYPE AND 5S STYLE |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Hole Configuration Style | ROUND |
| Screw Material Document and Classification | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| Hole Quantity | 1 |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Fastener Length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN500A8-12 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
NSN 5305-00-151-0369 is a Screw,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-00-151-0369 has 1 cross-referenced part number: AN500A8-12 (Aeronautical Standards Group Dept of Navy and Air Force).
There is 1 known substitute for 5305-00-151-0369: 5305-00-660-2625. Verify interchangeability with system specifications before substitution.
Key specifications for AN500A8-12: Head Height: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN; Hole Diameter: 0.047 INCHES NOMINAL IN; Screw Material: STEEL COMP 1010; Thread Series Designator: UNIFIED NATIONAL COARSE (UNC). 20 total characteristics are documented in the Federal Logistics Information System.