The Screw,machine, cataloged under National Stock Number 5305-00-271-5230, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5305-00-271-5230 |
| Primary Part Number | AN502-10-4 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | CANCELLED |
| Screw Material Document and Classification | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE |
| Head Height | 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Fastener Length | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Thread Length | 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM |
| Thread Quantity Per Inch | 32 |
| Internal Drive Style | SLOT |
| Thread Direction | RIGHT-HAND |
| Head Diameter | 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| Head Style | FILLISTER |
| Thread Series Designator | UNF |
| Head Hole Configuration Style | ROUND |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Hole Quantity | 1 |
| Screw Material | STEEL COMP 8630 |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN502-10-4 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| 7403223 | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| HS502-10-8 | Hydro-Aire Aerospace Corp (USA) |
| 01059 | Power Industries Inc (USA) |
| A1635-2 | Cessna Aircraft Co Mccauley Accessory Div (USA) |
NSN 5305-00-271-5230 is a Screw,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5305 (No Item Name Available). Status: cancelled.
NSN 5305-00-271-5230 has 5 cross-referenced part numbers: AN502-10-4 (Aeronautical Standards Group Dept of Navy and Air Force), 7403223 (U S Army Tank Automotive Command Amsta-Im-Mm), HS502-10-8 (Hydro-Aire Aerospace Corp), 01059 (Power Industries Inc), A1635-2 (Cessna Aircraft Co Mccauley Accessory Div).
There are 3 known substitutes for 5305-00-271-5230: 5133-00-227-9645, 1615-01-089-4184, 5305-01-645-8441. Verify interchangeability with system specifications before substitution.
Key specifications for AN502-10-4: Screw Material Document and Classification: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE; Head Height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM; Screw Surface Treatment Document and Classification: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE. 20 total characteristics are documented in the Federal Logistics Information System.
NSN 5305-00-271-5230 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.