PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN502-10-4
AN502-10-4 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include special_features: USED TO HOLD DOWN VENT VALVE PLATE, CAGE IS OEM, part_name_assigned_by_controlling_agency: SCREW. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-271-5230, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN502-10-4
NSN: 5305-00-271-5230
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
special_featuresUSED TO HOLD DOWN VENT VALVE PLATE, CAGE IS OEM
part_name_assigned_by_controlling_agencySCREW
NSN5305-00-271-5230
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN502-10-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
HOLE DIAMETER: 0.046 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
HOLE DIAMETER0.046 INCHES NOMINAL IN
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
THREAD LENGTH0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
THREAD QUANTITY PER INCH32
INTERNAL DRIVE STYLESLOT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
01059Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
70351-08401-102Interchangeable
interchangeable cross-reference
interchangeable
A1635-2Interchangeable
interchangeable cross-reference
interchangeable
AN502C10-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN502-10-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN502-10-4?
AN502-10-4 is a SCREW,MACHINE.
What parts can replace AN502-10-4?
There are 9 known substitutes for AN502-10-4: B94.11M, 01059, GGG-D-751 and 6 more. Substitute compatibility should be verified for your specific system.
Is AN502-10-4 still available?
AN502-10-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN502-10-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026