The Screw,machine, cataloged under National Stock Number 5305-00-180-0038, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 9 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5305-00-180-0038 |
| Primary Part Number | AN501A6-18 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | CANCELLED |
| Head Height | 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN |
| Thread Length | 1.075 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Head Style | FILLISTER |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Thread Series Designator | UNF |
| Thread Direction | RIGHT-HAND |
| Hole Quantity | 1 |
| Thread Quantity Per Inch | 40 |
| Head Hole Configuration Style | ROUND |
| Fastener Length | 1.125 INCHES NOMINAL IN |
| Thread Class | 2A A |
| Head Diameter | 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Screw Material | STEEL OR STEEL COMP 1010 |
| Screw Surface Treatment | CADMIUM |
| Screw Material Document and Classification | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN501A6-18 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| FFS92ANDTYPE1ANDSTYLE5S | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
| S6033 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 501A6-18 | Department of the Air Force (USA) |
NSN 5305-00-180-0038 is a Screw,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5305 (No Item Name Available). Status: cancelled.
NSN 5305-00-180-0038 has 4 cross-referenced part numbers: AN501A6-18 (Aeronautical Standards Group Dept of Navy and Air Force), FFS92ANDTYPE1ANDSTYLE5S (Federal Specifications Promulgated by General Services Administration Washington DC), S6033 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 501A6-18 (Department of the Air Force).
There are 9 known substitutes for 5305-00-180-0038: 5305-00-167-2315, 5305-00-167-2317, 5305-00-167-2320 and 6 more. Verify interchangeability with system specifications before substitution.
Key specifications for AN501A6-18: Head Height: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN; Thread Length: 1.075 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN; Head Style: FILLISTER; Internal Drive Style: CROSS RECESS TYPE 1. 19 total characteristics are documented in the Federal Logistics Information System.
NSN 5305-00-180-0038 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.